The AC SMART has a Bluetooth interface and can be paired with the AC SMART app via this interface. The Bluetooth pairing mode can be started either manually using the power supply or via the integrated web server. Below you will find step-by-step instructions for starting the Bluetooth pairing mode.
1. If the EV charging box is connected to the power grid, switch the residual current circuit breaker or circuit-breaker off.
2. Switch the power supply on after 10 to 12 seconds and then back off after 10 to 12 seconds.
3. Repeat the process of switching the power supply on and off. The Bluetooth pairing mode starts the third time the power supply is switched on. The EV charging box will now be in coupling mode for 5 minutes. The status LED will flash blue.
After the coupling is complete, coupling mode is ended automatically.
Open the web server of your AC SMART (see chapter 9.3 of the operating instructions). In the menu item Network under General ,click Start in the section Pairing mode.
The EV charging box will now be in coupling mode for 5 minutes. The status LED will flash blue.
After the coupling is complete, coupling mode is ended automatically.